Installation

All Categories > All Print Products > Large Format Products > Adhesive Vinyls > Installation

A Basic Guide To Installation Temperatures for Vinyl Graphics

Surface temperatures must be between 50 and 90 degrees Fahrenheit (10 and 32 degree Celsius) before attempting the installation. As a general rule, if the surface is hot to the touch it's over 90 deg…

Updated 3 years ago by Mike Lowell

How to can I remove a decal or sticker from a surface?

Steps to remove a decal form a surface: Begin by heating one corner of the marking with a blow dryer, heat lamp, hot water or heat gun until hot to the touch. Pick up and lift that area you just heat…

Updated 3 years ago by Mike Lowell

How to prepare a surface for a decal or adhesive vinyl installation?

All surfaces are contaminated to some degree. To ensure good adhesion to any surface it is critical that you follow these recommended procedures in decontaminating and preparing the surface prior to…

Updated 3 years ago by Mike Lowell

What surfaces are recommended for installing decals or vinyl?

When installing vinyl, it is important that you apply the product to an adequate surface, one to which it will readily adhere. The good news is vinyl will stick to many surfaces. In determining wheth…

Updated 3 years ago by Mike Lowell

(opens in a new tab)

Installation

A Basic Guide To Installation Temperatures for Vinyl Graphics

How to can I remove a decal or sticker from a surface?

How to prepare a surface for a decal or adhesive vinyl installation?

What surfaces are recommended for installing decals or vinyl?

Contact